page 18
© HUGO BIKE
Version of the manual 1.1
4.2. HANDLEBAR MOUNTING
Designed for mounting on the left side of the handlebars with a diameter of 22mm.
Unscrew the M4x10 Allen screw and carefully tilt the plastic sleeve. Place the display on
the handlebar, snap in the sleeve and gently tighten the screw so that the display on the
handlebars cannot move.
CAUTION, do not overtighten the screw. The sleeve could break.
4.3. DESCRIPTION OF FUNCTIONS
4.3.1. SWITCHING THE SYSTEM ON / OFF
Hold down the “ON” button for two seconds until the HUGO Bike logo lights up on the display. To switch off the system, proceed
in the same way or switch if off with the key.
Note: If the scooter is inactive, the display will turn off automatically (0-9 min depending on the settings, it can also be turned off in the
menu).
4.3.2. SELECTION OF LEVELS OF POWER LEVELS
Briefly/Shortly press “PLUS“ button to increase the motor power level and the “MINUS“ button to decrease the motor power
level. The standard range of mode power levels is 0-5, but it can be changed to 0-3 or 0-9 in the menu.
4.3.3. CURRENT SPEED
The current speed is displayed both in numerical form in the middle of the display and in the circular graphic frame of this data.
DISPLAY 500c
M4X10
