page 12
© HUGO BIKE
Version of the manual 1.1
3.1. SCOOTER CONSTRUCTION
After unpacking, carefully remove all packaging material and inspect the electric scooter for damage during transport. In the
case of sending an electric scooter by a transport service, the package must contain the following:
• handlebars,
• front wheel,
• frame with rear wheel,
• fork.
Assembly instructions:
1) Remove all components from the shipping container.
2) Place the handlebars in the hole of the stem.
3) Use an Allen key 5 or 6 (depending on the type) to tighten the screws and secure the handlebars into the stem.
4) In the case of a quick-release system, release the lever and unscrew it.
In the case of a nut, loosen the end nuts on the front wheel axle using a spanner 15.
5) Insert the front wheel into the front fork (according to the direction indicated on the side of the tire).
6) The front wheel must be fitted during installation so that the brake disc fits into the jaws mounted on the fork.
If you have an electric scooter folded, turn the ignition key to the ON position. Then turn on the display with button (see picture).
The display with HUGO Bike logo lights up and the electric scooter is ready to ride.
CONSTRUCTION
