Hughes HX90, Руководство пользователя

Страница: 33 / 88

Chapter 2 • System Control Center
1039457-0001 Revision A
33
Table 7: System Information page parameters – HX90 Info section
Parameter Explanation
Site ID Identifies the site where the router is installed.
Serial number The router’s serial number. The serial number may be required for
troubleshooting.
Zipcode ZIP code of the router site.
Software Date Software build date.
Software Release Version of the router’s software. This is typically the factory-installed
software version. However, if the NOC downloads a newer version of
Gateway software to the router, the newer version number is
displayed.
LAN1 IP Address The satellite router address. The default router address is 192.168.0.1.
A different router address can be configured.
LAN1 Subnet Mask Range of addresses available to the satellite router.
LAN1 MAC Address MAC address for the satellite router.
Port Forwarding Configuration page
Note: The Port Forwarding Configuration page and link are present on your HX90
only if they have been enabled by the NOC.
The Port Forwarding Configuration page and the link to it are present only if port
forwarding has been enabled and made visible on the router by the NOC.
On this page you can define rules for allowing TCP and UDP traffic on the Internet to
access servers on your network.
Figure 20: Port Forwarding Configuration page