Hughes HughesNet Ka-band, Руководство по указанию

Страница: 32 / 44

Chapter 2 • Pointing the antenna
24
1037663-0001 Revision A
If, however, final cell selection has not yet been performed, or
if the registration megaframe initialization packet (MIP) has
not been received, the DAPT may instead display the
following message:
where
X
is a number from 1 to 7. This message indicates that
the IDU is checking the installation parameters for specific
information. If the search is successful, the following
message appears when the search is complete:
Press Advance and continue with step 2 above.
If the search fails, the following message appears:
This message indicates that an error has occurred. You must
resubmit the installation parameters at the IDU and restart the
pointing process, beginning with coarse pointing.
The following message may also appear:
This message indicates that the circular polarization must be
reversed. During cell selection, it is possible that the closest
working cell is in an adjacent uplink (UL) cell, which
requires reversing the circular polarization at the antenna. If
this message appears, you must change the circular
polarization on the transmitter. See
Troubleshooting on
page 30 for more information.
Note: If you change the circular polarization, you must
fine-point the antenna again.