Hughes HughesNet Ka-band, Руководство по указанию

Страница: 19 / 44

Chapter 2 • Pointing the antenna
1037663-0001 Revision A
11
7. Enter the site latitude and longitude values you recorded from
your GPS in step 1.
8. Click Submit Installation Parameters . The IDU saves the
information and enters Pointing mode. The Terminal Pointing
Info screen appears on the installer laptop as shown in
Figure 6.
Note: You may overwrite any pre-existing values, but be
aware that pointing metrics will be deleted if you change any
of the following installation parameters from a previous
installation:
– Site latitude
– Site longitude
– Satellite orbital location (A Code)
– Antenna size (B Code)
– ODU power (C Code)
– Satellite Unique Word ID (U Code)
Pointing metrics are also deleted if the satellite modem is
uninstalled, although not when it is unregistered.
Note: Do not change the Antenna Pointing Indicator Delay
value.
Note:
1. If you modified any existing parameters, the modem
reboots first, and the Terminal Pointing Info screen appears
following the reboot.
2. To return to the Installation screen at any time, click
Modify Installation Parameters .