Hughes HN9200, Руководство по установке

Страница: 68 / 132

Confirming that the satellite modem’s files are up to date
Use the System Control Center to confirm that the satellite modem is operating with the most
current version of software.
1. Open a web browser such as Internet Explorer.
2. In the browser's address bar, type
www.systemcontrolcenter.com
or
192.168.0.1
.
3. Press
Enter
.
The System Control Center home page appears in the browser window.
4. Click the System Status link.
The System Status page appears.
Figure 47: System Status page
5. Check the Software Download Status.
If it reads
All files are up-to-date , the modem has been commissioned.
6.
Wait 15 minutes after completing registration for all files to be downloaded from the NOC
to the modem.
7. If All files are up-to-date does not appear after 15 minutes, restart the modem:
a) Go to the System Control Center home page.
b) In the Help section, click
Restart HN9200 .
8.
If you do not see the
All files are up-to-date
message, power cycle the satellite modem:
a) Unplug the power cord from the power source.
b)
If the modem is connected to a DC power source, unplug the DC input cable from the
modem’s power supply.
c) Wait 5 sec.
d) Plug the power cord back into the power source.
HN9200 Satellite Modem Installation Guide
56
1038622-0001 Revision B
Completing the installation Chapter 5