Hughes HN9200 Скачать руководство пользователя страница 35

Страница: 35 / 132

Verifying the Ethernet connection

Execute a ping test to verify that the Ethernet connection between the satellite modem and the
installer laptop is active:

Open a command prompt or window on the installer laptop.

Type

ping 192.168.0.1

Press

Enter

If the ping is successful, the ping results show that all sent packets were received.

Figure 9: Successful ping test

If the ping fails, the ping results show that packets were lost, and time-out messages may
also appear.

Figure 10: Failed ping test

If the ping test fails, make sure:

•

The laptop’s network interface card (NIC) is properly installed

•

The laptop is configured to support DHCP

If the NIC is installed properly and the laptop is configured to support DHCP, make sure all
cable connections are secure (properly aligned—not cross threaded; finger tight with no
play).

If the connections are secure:

a) Unplug the modem from the power source.
b) Shut down and power off the computer.
c) Plug the modem back in.
d) Turn the computer back on.

HN9200 Satellite Modem Installation Guide

1038622-0001 Revision B

Chapter 4

Commissioning the satellite modem

Содержание HN9200





































































































































Результаты поиска

Содержание HN9200

Отзывы:

Похожие инструкции для HN9200

Бренды по названию

Популярные бренды

Hughes HN9200, Руководство по установке

Результаты поиска

Содержание HN9200

Отзывы:

Похожие инструкции для HN9200

Бренды по названию

Популярные бренды