24.
STAGEBOARD JACK
Connect the included ATTAX STAGEBOARD to this MULTIPIN jack.
Your ATTAX
preamp
package includes the STAGEBOARD which enables you to
activate the 3 CHANNELS and the STEREO EFFECTS LOOP via footswitches.
NOTE: Ensure the CLEAN /TUBE and CRUNCH /
LEAD SELECTOR SWITCHES on
the
FRONT PANEL
are set to
OFF
(not
pushed
in) when operating the
ATTAX
in
the
STAGEBOARD
footswitch
mode.
A combination of the two operating modes
(
footswitch /front panel
)
is not
recommended.
QUICK
ACCESS TO THE CHANNELS VIA THE STAGEBOARD.
When you switch from the solid state preamp section to the tube section via the
STAGEBOARD, it is advisable to pre-select the channel via the LEAD /CRUNCH
SELCECTOR SWITCH. You can then switch channels in one motion.
LEDs are integrated in the STAGEBOARD to give you a clearer picture of the channel
switching status for on-stage applications.
These LEDs tell you which of the two CRUNCH / LEAD channels is preset. The front
panel LEDs denete the currently active channel.
EFFECTS LOOP SWITCHING VIA THE ATTAX STAGEBOARD
In addition to channel selection feature, the STAGEBOARD can also be used
activate/deactivate the STEREO EFFECTS LOOP via the FX ON / OFF SWITCH. The
appropriate LED illuminates when the LOOP is active.
Circuitry:
Channels:
1
Solid-State
CLEAN
,2
Tube preamps CRUNCH / LEAD
CLEAN:
CRUNCH:
Jacks:
LEAD: Volume, Lead Master
Input, Phones, Recording Out ( Left / Right ), Mono Loop ( Send / Return ),
Stereo Loop ( Send / Return Left - Return Right ), Line Out ( Left / Right ),
Footswitch.
Dimensions:
19” / 1 HU
Volume, Bass, Mid, Treble - Master Volume
Volume, - Crunch Master
Bass,
Mid, Treble
