13.
LEADMASTER
Regulates the LEAD channel’s volume in relation to CLEAN and CRUNCH channels’
respective volumes.
14.
FX-MIX
The FX MIX pot regulates the original signal’s volume and its relationship to that of
the processed signal, i. e. the one sent from the effects device connected to the
STEREO EFFECTS LOOP. DRY =
original signal only, WET = processed signal only.
You
can dial in any signal blend between these two extreme settings.
NOTE: If no signal procession is connected to the STEREO LOOP, then the
FX-MIX
pot can be used as a master volume. The FX-MIX has no influence on overall ATTAX
output when it is set to DRY (refer to the “Activating a Second MASTER VOLUME”
paragraph on the following page ).
15.
MASTER VOL
The ATTAX's
overall output is
defined via the MASTER VOLUME knob. It influences
all outputs.
16.
PHONES
1/4" head phone jack. The PHONES
output
jack delivers a speaker-simulated signal,
so the ATTAX sounds similar to your stage setup at headphone volumes.
17. MAIN SWITCH:
AC mains power switch
1 8 . M A I N S
The included
Euro-norm mains cable
is connected to this socket. Ensure the voltage
selector is set to the correct voltage (refer to the safety guidelines).
19. FUSE
Use a screwdriver to unlock and unscrew the FUSE
holder.
Ensure replacement fuses’
specifications are identical to the original. The ATTAX is factory-set to the European
norm of 230 V.
20.
RECORDING OUT JACKS
The RECORDING OUT jacks deliver a frequency-corrected STEREO SIGNAL,
comparable to a that of a miked 4 x 12” cabinet, ideal for home recording, studio,
and DI-to-mixer applications.
