15
Maintenance
Charging the Drive Battery
WARNING
Risk of fire.
Do not bypass or tamper.
23
Socket
Signal
Charger
DC plug
Charging Port
Battery black-plug (-)
Red
cable
Black cable
Driving
control board
5A over-current
protection
Battery
red-plug (+)
1. Charge Drive Battery after 1-2 hours of use or when the vehicle does not move at
its normal speed.
2. Ensure Power Switch is OFF
.
3. The charger socket is located at rear end of the car right side. Open the tank cap
to access socket.
4. First insert the charger DC plug into the socket and then insert the charger into the
wall socket.
5. After charging is complete (at least 8 hours, but not more than 15 hours) unplug
the charger from the wall outlet.
6. Unplug the charger from the charger socket.
7. Close the Tank Cap.
NOTE:
The charger may feel warm during the charging. This is normal and not a cause
for concern. If excessively hot, unplug and replace.
Charging the Drive Battery
NOTE: Before first use, charge battery 10 to 12 hours.
