Hudson Terraplane De Luxe 1935, Руководство пользователя

Страница: 44 / 51

by attaching sliding type balancing weights to the inside rim flange. The
proper position of these weights can, however, be determined only by use of a
wheel balancing machine.
Removal of Spare Tire from Vestibule
To remove the spare wheel and tire from the rear vestibule of the body, open
the door and remove the mounting screws from the wheel huh. Grasp the tire
at the top and pull toward you until the wheel is standing upright, then roll the
wheel toward the right. The wheel and tire will roll over the sill of the opening
readily.
BODIES
Because of the all-steel construction, the welding of outside panels to the
structural framework, as well as the welding and riveting of all structural
members, the body structu
r
e should remain rigid and quiet throughout the life
of the car.
Seat Adjustments
All front seats are adjustable for driver's comfort. By moving handle
side-wise at left front corner of seat, the mechanism is unlocked so the seat can
be moved forward or backward. Releasing the handle locks the seat.
The Coach front passenger seat adjustment is controlled by the seat back.
By pulling the seat back forward the mechanism is unlocked and the seat can
be slid forward to permit easy entrance to the rear of the car either by further
tipping of the back or by pulling forward on the seat itself. When the seat hack
is pushed back into position, the seat resumes its normal position and is locked
in place.
Windshield Regulator
The windshield regulator is of the crank-operated type and permits the
windshield to he opened to any degree within its operating range. It is self-
locking in any position.
Trim Panels
All side wall and door upholstery panels are attached with screws which are
visible along the edges of the doors and pillar posts when the doors are open.
By removing these screws and the regulator and lock handles on the panel in
question, it can be readily withdrawn.
The windshield header panel which covers the windshield hinge adjust-
ment, as well as the windshield wiper mechanism, is fastened where it joins
the head-lining and held in a retaining channel at the bottom. By removing the
sun visor, windshield wiper control handle and the screws in the upper
windshield header, two of which hold the rear vision mirror, the retaining
channel can he withdrawn and the header panel released sufficiently to gain
access to the hinges and windshield wiper. It should not be necessary to disturb
the upper fastening of this panel.
42 TERRAPLANE DE LUXE SIX