Hudson Terraplane De Luxe 1935, Руководство пользователя

Страница: 22 / 51

Starting Motor
The starting motor is controlled by a push button on the instrument
panel through a solenoid switch mounted on top of the starting motor.
The switch can be operated manually by removing the cap on the rear
of the switch and pushing the plunger in. The drive to the gear on the
engine flywheel is through it Bendix drive which is brought into
engagement by the rotation of the starting motor.
The front bearing of the starting motor should be lubricated at (B),
Figure 4, with a few drops of light oil every 1,000 miles. The Bendix
drive assembly (C) should be flushed with kerosene every 2,000 miles.
Generator
The generator is of the ventilated type, allowing a greater output than
is practical with the non-ventilated type. The maximum output is
controlled by a third brush and should be set at 22 amperes. This
adjustment requires the use of an accurate ammeter and voltmeter and
should be made by an Authorized Terraplane and Hudson Service
Station.
A generator output regulator is mounted on the engine side of the
body dash and reduces the output from 22 to 10 amperes when the
battery is fully charged, reverting to the higher rate should the battery
become partially discharged due to frequent starting or continuous use
of lights, radio, etc. This regulation is permanently built into the
regulator and no adjustment of this unit is necessary
20 TERRAPLANE DE LUXE SIX
Figure 6