HUDSON STEEL Leg Press/Hack Squat Station, Руководство пользователя

Страница: 9 / 18

Step 1
1. Connect Left and Right Support Frames (#17,#18) to main Base Frame (#19)
using:
two M12*80 BHCS (#57) four<l>13*<1>24 *1.5 Washer (#49)
two M 12 Nylon Lock Nut (#61)
2. Attach Rear Base Frame (#25) and Upright Frame (#1) to Main Base Frame
(#19) using:
two M12*80 BHCS (#57) four<l>13*<1>24 *1.5 Washer (#49)
two M 12 Nylon Lock Nut (#61)
3. Attach Left and Right Slide Frames (#3,#4) to Left and Right Support Frames
(#17,#18) using:
four M12*75 BHCS (#56)
four<l>13*<1>24 *1.5 Washer (#49)
four<l>13*<1>38*2 Washer (#67) four M 12 Nylon Lock Nut (#61}
4. Secure Top Cross Frame (#2) to Left and Right Slide Frames (#3,#4) and
Upright Frame (#1) using:
two M12*125 BHCS (#59)
six M 12 Nylon Lock Nut (#61)
six <1>13*<1>38*2 Washer (#67)
four<l>11 *<1>20*2 Washer (#48)
two<l>13*<1>24*1.5 Washer (#49)
two M12*204 Shaft Blot (#65)
four M10*25 BHCS (#53)
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
-9-