29
Cleaning the Burner Assembly
Follow these instructions to clean and/or re-
place parts of burner assembly or if you have
trouble igniting grill.
1. Turn gas off at control knobs and LP cylin-
der.
2. Remove cooking grates and heat diffusers.
3. Remove carryover tubes from rear of burn-
ers.
4. Remove cotter pin from rear of burners.
We suggest three ways to clean the burner
tubes. Use the one easiest for you.
(A)(Bend a stiff wire (a light weight coat hang-
er works well) into a small hook. Run the
hook through each burner tube several
times
.
(B) Use a narrow bottle brush with a flexible
handle (do not use a brass wire brush), run
the brush through each burner tube several
times.
(C) Wear eye protection: Use an air hose to
force air into the burner tube and out the burn-
er ports. Check each port to make sure air
comes out each hole.
6. Wire brush entire outer surface of burner to
remove food residue and dirt.
7. Clean any blocked ports with a stiff wire
such as an open paper clip.
8. Check burner for damage, due to normal
wear and corrosion some holes may be-
come enlarged. If any large cracks or holes
are found replace burner.
VERY IMPORTANT: Burner tubes must reen-
gage valve openings. See illustrations at right.
9. Carefully replace burners.
10.Attach burners to brackets with cotter pins.
11.Reposition carryover tubes and attach to
burners. Replace heat diffusers and cooking
grates.
Содержание 305BX
