23
/
26
Installation instruction
Desktop Installation
Put the camera on the desk flat, and make sure the camera in level. If wan to put the
camera on oblique surface, please make sure the angle of inclination less than 15 degree for
ensure camera pal and tilt working in normal operation.
Tripod Installation
Twist the tripod’s screw on the camera tripod hole, then the tripod could be installed on
the bottom of camera. The tripod screw must fit below specifications:
Note:
z
Tripod must stand on a flat surface.
z
The screws and cap which used for tripod must not be used for a higher
position, such as ceiling mount.
