Ver 1.2 6/15
OSD MENU……………………………………………………………………………………………..
On Screen Display Menu
- Use the OSD menu to access and change the camera’s
settings.
Note:
You cannot manually move the camera (pan/tilt) when the OSD menu is visible
on the screen.
The Dome OSD Menu is as follows:
Pan Speed
Default Value: 20
o
Set speed of Pan motor
o
Range = 1 - 63
Tilt Speed
Default Value: 20
o
Set speed of Pan motor
o
Range = 1 – 63
Scan Speed (Auto Pan Mode)
Default Value: 6
o
Set speed of boundary scan
o
Range = 1 – 63
Tour Path (uses presets)
Default Value: 1
o
Select desired tour path
o
Range = 1 – 4
Tour Dwell
Default Value: 5
o
Set duration to dwell on each preset
o
Range = 1 – 60
Proportion
Default Value: On
o
Set Proportion - Range
o
On – Off
Auto Rev
Default Value: P
o
Set camera mounting orientation
o
N for inverted ceiling mount
Frame
Default Value: 60Hz
o
Set Refresh Rate
o
Range = 50Hz or 60 Hz
