17
PREVENTATIVE MAINTENANCE CHECK LIST
For Hud-Son Sawmills
Cleaning your Saw Mill
Using an air hose, blow off all loose debris that builds around the unit.
Use extreme caution when cleaning the mechanism.
Never use flammable or combustible materials to clean the mill.
Be in a well ventilated area. Always wear protective equipment to
prevent injury.
Use proper procedure to dispose of waste materials.
Wipe down the idler and pulley wheels using an air hose, brush or rag.
Clean and inspect blade guides.
Preventative Maintenance
For electrical engine follow the correct Lockout/Tagout procedures.
Check for correct blade tension guaranteeing that 30-35 pounds of torque is
on tensioning bolt/nut.
Check track to make sure it has not moved and check it for level.
Check blade tracking, a 1 - ¼" blade should be centered on band wheels and
back of blade should be flush with bandwheel.
Check bearing, idler and pulley wheels for wear. Signs of wear are:
• Excessive heat
• Squeaking sounds
• Looseness
Grease idler, pulley wheels and bearings.
Grease blade tensioner shaft.
Grease the lift tubes.
Check all belts for wear and to make sure the belt tension is "taut".
Belt should have no more than ½" deflection.
