HUCK Seiltechnik 5000-6-6, Руководство по сборке

Страница: 34 / 39

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
seiltechnik@huck.net - www.huck.net
\\CAD1\Huck-SG_Mont-Anl\Huck-Mont\Englisch\5000-6-6\Spider_5000_6_6_ST_B_L_1_GBR.doc 34
Regular maintenance
10 Monthly maintenance
10.1 Check the spaces between the equipment and the ground (clearance and
height of fall).
10.2 Check the ground surface in the area with fall protection for hard objects
and loose foundations.
10.3 Check all connecting elements and fittings for wear and tear and tighten
if necessary. Replace damaged or missing parts.
10.4 Check that moving metal parts (joints, springs, etc.) move smoothly and
are not worn. Replace if necessary. It is not necessary to lubricate joints
as we only use maintenance-free metal roller bearings.
10.5 Check all attachments such as chains, ropes, nets, etc. for damage and
replace if necessary.
10.6 Check rubber parts, sleeves, etc. for wear and tear or damage and re-
place if necessary.
10.7 Check the surface of wooden parts for damage caused by the weather or
external influences and mould. Repair or replace if necessary.
10.8 Check the surface of plastic and metal parts, e.g. slides, for damage and
replace if necessary.
11 Quarterly maintenance
11.1 Detailed inspection of the operation and stability of the equipment pay-
ing particular attention to any wear and tear.
11.2 Tighten all forms of attachment.
11.3 Repaint and retreat surfaces.
11.4 Maintenance of fall protection surfaces.
11.5 Lubrication of joints.
11.6 Check the height of the fall and top up with loose filler if necessary. If the
posts are labelled, top up as far as the mark.
11.7 Retension the tension rops after a period of 3 months.
Afterwords please check in equal intervals.
11.8 Retighten all bolts