4.3 Operation of the Software
The above software A1230-MultiChannel-Control always shows both amplifier channels. The
following buttons and indications are identical and available for each channel separately.
[1]
CONFIGURATION
The configuration menu is called up.
The following characteristics of the A1230-02 can be preset with the aid of the configuration
menu (startup configuration). The amplifier then starts after the repeated switching on with
the adjusted options.
[2]
DEVICE
Show the connection status (device name and used port), if a connection was established.
[3]
INFO
Here you find information about your GUI software version, as well as the amplifier firmware
and the amplifier hardware.
[4]
TEMPERATURE
The heat sink temperature is displayed in °C. At 75 °C the amplifier switches off and at
50 °C on again.
A1230-02
A1230-MultiChannel-Control Software
Page 14
