Page
12
of
30
Q.E.D. ENVIRONMENTAL SYSTEMS LIMITED -
Cyan Park - Unit 3, Jimmy Hill Way, Coventry. CV2 4QP.
UNITED KINGDOM
Tel: +44 (0)333 800 0088
E-Mail:
Web:
www.qedenv.com
REGISTERED IN ENGLAND AND WALES NO. 1898734
OMLASERONE Iss. 01
Saving leaks
To save a leak into the memory of the instrument, push the jogdial and rotate it until the Menu
“Save Leak” appears. Push the jogdial to save the leak.
This operation is possible only if the GPS is on.
Delete data
To delete the data stored in the instrument, press the jogdial and
rotate it until the menu displays DELETE MEMORY. Press the
jogdial to confirm the selection.
Please Note: There is no secondary confirmation that you want to
delete data.
Description of the pneumatic circuits
The LASER ONE samples using a membrane pump. The typical flow is 0.8 l/m and the minimum flow
is 0.7 l/m.
The use of accessories, such as the probes can slightly reduce this flow. It is advised to only use the
parts and accessories supplied by QED Environmental Systems Limited.
The sample inlet port is suitable for a tube with the dimensions ID2mm X OD4 mm.
An internal hydrophobic filter protects the device against any ingress from dust or water. An
additional external filter is also recommended which can help protect the internal filter.
Warning
The Hydrophobic filter is not design to filter anything other than water
or moisture; chemicals may damage the efficiency of the filter.
Please be vigilant when completing a survey and avoid sampling dust
and moisture, as if the filter is too saturated it, may result in serious
damage to the internal sensors.
Malfunction of the pneumatic circuit / Pump OFF
The instrument detects when the pump flow is within normal
operating parameters.
If the flow reduces below certain limits, the pump will stop, the
LEDs will light up, the pump icon will have a ‘X’ overlay and the
message "PUMP ERROR" will be displayed.
Содержание Laser One
Страница 1: ...OPERATING MANUAL...