Huber MPC Minichiller 280, Руководство пользователя

Страница: 35 / 60

Function description
Chapter 3 OPERATION MANUAL
V2.4.0en/09.08.21//1.30
Minichiller®
35
For water-cooled temperature control units, please take the cooling water temperature necessary for perfect
operation and the required differential pressure from the data sheet. → From page 59, section »Annex« .
3.4 Display and control instruments
3.4.1 Display
The value of the internal temperature is displayed. For example, this is the bath temperature for
temperature control units with a bath, or the flow temperature of chillers. Different key combina-
tions also display the setpoint, a menu item or settings.
3.4.2 LED display status
These LEDs indicate the current operating condition.
3.4.3 Arrow keys
These keys are used to ( increase or decrease ) the setpoint or select or change a menu item. The
>Arrow keys< [C] are also required to call the menu up.
3.4.4 SET key
The >SET key< [D] is used to switch to the setpoint temperature. It is used to display and modify the set-
point temperature. The >SET key< [D] is also used to display the values of the various menu items.
3.4.5 Start/Stop key
This key starts or stops the thermoregulation.
3.5 Menu function
Your temperature control unit is equipped with a menu function.
Menu item Display Description
ADR Without a function
C40 Auto-Start function
PA Service menu
Only for Huber service personnel.
--
The control panel:
Displays and keys
Overview of the menu
items