Huber CC-405 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 94

background image

9

Intended Use and General Safety Instructions

Danger!

Non-intended use can result in considerable personal injuries and material damage.

No third persons are authorized to make any changes to the machine. The device
declaration becomes void, if any modification is carried out without manufacturers
consent. Only personnel trained by the manufacturer may carry out modifications,
repairs or maintenance work.

The following must be observed:

Always use the machine in a perfect working condition!
Only expert personnel may initially start-up and repair the device!
Do not bypass, bridge-over, dismantle or switch off the safety mechanisms!

The manufacturer is not liable for damages caused by technical changes
to the temperature control device, inappropriate handling and / or use of the
temperature control device without regard to the operating instructions.

The temperature control device is manufactured for commercial use only and may

only

be used to maintain the temperature

within the internal bath

(does not apply for chillers)

and to

maintain the temperature

of reactors or other professionally expedient objects in

laboratories and industry. Suitable thermal fluids are used throughout the entire system.
The cooling or heating power is provided at the pump connections and in the bath itself
(does not apply for chillers). The technical specifications of the temperature control
device are determined in the data sheet. Operation must be prepared and carried out
according to the operating instructions. Any non-observance of the operating
instructions is considered as non-intended use.
The temperature control device corresponds to the state-of-the-art and the recognized
safety-related regulations. Safety devices are built into your temperature control device.

The device is

NOT

approved for use as a medical product!

This temperature control unit is

NOT

built as explosion-proof and is

NOT

suitable for use in "ATEX" areas!

Foreseeable non-intended use:

-

Activate the brakes for machines with rollers or roller support.

«
...
7
8
9
10
11
...
»

Содержание CC-405































































































Отзывы:

Нет отзывов

Похожие инструкции для CC-405

Бренд: Home Automation Страницы: 19

Бренд: Taylor Страницы: 6

Бренд: VDH Страницы: 4

Бренд: TESTO Страницы: 2

Бренд: Control Company Страницы: 2

Бренд: Control Company Страницы: 2

Бренд: Danfoss Страницы: 10

Бренд: Würth Страницы: 36

Herpstat EZ Series

Бренд: Spyder Robotics Страницы: 2

ECO-i SHA-KT256BA

Бренд: Sanyo Страницы: 1

Бренд: Sanyo Страницы: 6

Бренд: 1 Source Страницы: 17

Бренд: Xylem Страницы: 36

Бренд: Xylem Страницы: 176

Бренд: White Rodgers Страницы: 1

Бренд: White Rodgers Страницы: 32

Бренд: White Rodgers Страницы: 42

Бренд: White Rodgers Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды