PD2794 02/2017
Page 1
Room Controller
Installation Instructions
Precautions
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
CAUTION: USE COPPER CONDUCTOR ONLY.
CAUTION - RISK OF ELECTRICAL SHOCK.
To prevent electrical shock, turn OFF power at the circuit breaker
before installing or servicing unit. Never wire energized electrical components.
NOTICE
: For installation by a licensed electrician in accordance with National and/or local Electrical Codes and the
following instructions.
NOTICE:
Do not install if product appears to be damaged.
Be sure to read and understand all instructions before installing or servicing unit
For Indoor use only. Do not use outdoors.
Disconnect switch or a circuit breaker must be provided and marked as the disconnecting device.
The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition.
Confirm device ratings are suitable for application prior to installation. Use of device in applications beyond its specified
ratings or in applications
other than its intended use may cause an unsafe condition and will void manufacturer’s
warranty.
All servicing shall be performed by qualified service personnel.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment
may be impaired.
No user serviceable parts contained inside unit. Refer all service related questions to the factory.
SAVE THESE INSTRUCTIONS!
