Hubbell GAI-Tronics RED ALERT 393-001AD, Руководство пользователя

Страница: 26 / 37

P
UB
. 42004-472C
A
UTO
-D
IAL
T
ELEPHONE
M
ANUAL
Page 24 of 34
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-472C.docx
07/16
Ring-down Operation
Ring-down operation enables the telephone to go off-hook when the CALL push button is pressed. The
ring-down system must detect loop current and ring-down to the appropriate telephone.
Table 3. Auto-Dialing Key Sequence Setup
Feature
Key
Sequence Description
Default
CALL Button
Auto-dial
Number 1 DD ... *1 Assigns a telephone number to the auto-dial memory 1. DD ...
represents the telephone number, which can be up to 24 digits in
length.
For access to an outside line, a pause may be required in the
telephone number to wait for secondary dial tone. The *#
represents a pause in the telephone number.
Examples :
To assign the police emergency number
911
to the auto-dial
button, enter
911*1
.
To assign 911 when a “9” is required to gain access to a CO
line, enter
9*#911*1 .
To store
*
or
#
as part of the auto-dial number, (such as for speed
dialing), enter these digits twice in succession.
None
CALL Button
Auto-dial
Number 2 DD ... *2 Same as
CALL
Button Auto-dial Number 1 except the sequence
ends in *2 instead of *1.
None
CALL Button
Auto-dial
Number 3 DD ... *3 Same as CALL Button Auto-dial Number 1 except the sequence
ends in *3 instead of *1.
None
Primary Dial
Tone Delay # 1 0 N N The dial tone delay is the amount of time the unit can wait for a
dial tone before auto-dialing the telephone number. (00* [20
seconds]; 01–15 seconds)
Example : To wait up to 5 seconds for a dial tone, enter
# 1 0 0 5
.
*N
OTE
: If dial tone is not detected then autodialing does not
occur.
03 (3
seconds)
Secondary Dial
Tone Delay # 1 1 N N This feature is only used if you must dial 9 to access an outside
line. It determines the amount of time (00–15 seconds) the
telephone waits for a second dial tone. The first programming
step indicated you must program
9*# and the number you want the
auto-dial to access. This programming parameter allows you to
choose the amount of time the telephone waits after sending the 9
and pausing before dialing the auto-dial number.
Example : To wait 10 seconds for the second dial tone, enter
# 1 1 1 0 .
02 (2
seconds)
Ring-down
Operation *1
This option clears the telephone number to prevent auto-dialing
when the button is pressed. After the button is pressed, the ring-
down system must detect loop current and ring-down to the
appropriate telephone. None