Hubbell GAI-Tronics 1193 Скачать руководство пользователя | Manualshive

Страница: 8 / 78

background image

GAI-TRONICS

VoIP Telephone Configuration Guide

Page 8 of 78

Handset phone

Used to denote a telephone from the GAI-Tronics Titan or Commander product ranges, with a
separate handset attached to the main telephone body by a heavy duty flexible cord. No
separate loudspeaker is fitted to these models.

Hands-Free phone

Used to denote a telephone from the GAI-Tronics Help Point or Vandal Resistant product
ranges, with a microphone and speaker integrated into a flat panel. No corded handset is
fitted to these models.

LNR

Standing for “last number redial”, this is a button provided on some models of GAI-Tronics
phone to redial the last manually dialled number.

Memory dial number

On an analogue or cellular phone, memory numbers are pre-stored digit sequences used to
start calls. With VoIP these can also be URI

’s rather than numbers, but are still referred to in

the same way.

Mute

A function to temporarily mute the microphone so that the remote party cannot hear. On GAI-
Tronics telephones this function is provided by the "S" button.

NU tone

Number unobtainable tone

– used to indicate that a call cannot connect due to the end point

not being recognised.

Off hook

Used to denote the state of a telephone during an active call, or when a call has been
initiated. For a handset phone, off hook usually means that the handset is lifted.

On hook

Used to denote a telephone in the idle state

– no call started or answered. A telephone is still

on hook when it is ringing on an incoming call.  For a handset phone, on hook usually means
the handset is not lifted.  If a call is terminated whilst the handset is still lifted (for example by
the CALL LIMIT timer), the telephone is placed into the on hook state.  For a hands-free
phone, on hook means that no ON or WAKE & DIAL button has been pressed following a
terminated call or reset.

Register Fail tone

A tone played to the user initiating a call to indicate that the telephone is not currently
registered with a registrar, meaning that a call cannot be made.

Ring tone

A tone played to the user initiating a call to indicate that the call has been placed but not yet
answered. This usually signifies that the remote end is ringing.

Ringing

A loud alert tone made by the telephone indicating that an incoming call is ready to be
answered.

Secrecy (mute)

A function to temporarily mute the microphone so that the remote party cannot hear. On GAI-
Tronics telephones this function is provided by the "S" button.

Sidetone

On handset phones, part of the microphone signal is fed to the earpiece so that the user can
hear his or her own voice during the call. This makes it a more natural experience, and has
been a feature of analogue telephones since their invention. Not used on hands-free phones.

«
...
6
7
8
9
10
...
»

Содержание GAI-Tronics 1193















































































Отзывы:

Нет отзывов

Похожие инструкции для GAI-Tronics 1193

Бренд: Haier Страницы: 42

Бренд: i-mate Страницы: 29

Бренд: Fanvil Страницы: 16

Бренд: Gigaset Страницы: 27

Бренд: Sonim Страницы: 66

Бренд: Alcatel Страницы: 29

Бренд: Alcatel Страницы: 51

Verizon TXT8035PP

Бренд: Pantech Страницы: 50

Бренд: PCD Страницы: 16

Бренд: BCM Страницы: 26

Бренд: Xiaomi Страницы: 6

Бренд: GE Страницы: 2

Бренд: GE Страницы: 21

Бренд: Hi-Tech Страницы: 12

Бренд: Sanyo Страницы: 2

Бренд: Sanyo Страницы: 2

Бренд: Sanyo Страницы: 2

Бренд: Lava Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды