Hubbell GAI-TRONICS 10959-001 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 33

Hubbell GAI-TRONICS 10959-001 Скачать руководство пользователя страница 3

42004-344

I

GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA

610-777-1374

800-492-1212

Fax: 610-796-5954

V

ISIT WWW

.

GAI

-

TRONICS

.

COM FOR PRODUCT LITERATURE AND MANUALS

Wall-Mount Audio Messenger Interface

Models 10959-001, -002, -003, and -004

Getting Started

Product Overview

Thank you for your purchase of the GAI-Tronics Audio Messenger Interface. The Audio Messenger
Interface (AMI) tone/speech generator broadcasts live pages, telephone pages, pre-recorded alarm tones,
pre-recorded speech messages, etc., for use in virtually any application. For application examples, please
see the “Application Notes” on the AMI Configuration Tool CD.

Prior to installation of the AMI, we recommend you read the entire manual and inspect the contents of the
package to ensure the following are included:

•

Audio Messenger Interface (See model chart on page 5.)

•

SmartMedia

®

memory card

•

AMI Configuration Tool (ACT) CD

•

Product Evaluation Card – Please fill out and return at your earliest convenience

Features and Functions

The Audio Messenger Interface (AMI) is a tone/speech generator that can be tailored to broadcast
tones/speech messages for many applications. The following is a sample of the included and optional
features:

•

AMI Configuration Tool Software,
complete with:

-

Pre-recorded alarm tones

-

Pre-recorded speech messages

•

8 inputs/outputs plus expansion option

•

Real-time clock

•

Option to route audio to 8 individually
controlled zones

•

Scheduled events

•

Live speech messages

•

Telephone access with built-in feedback eliminator

•

Secure telephone access

•

Integration to Page/Party

®

systems

•

Day/Night modes

•

Integration to ADVANCE systems

•

VLC Activation

The Audio Messenger Interface Configuration Tool (ACT) software is used to define and change
configurations for the Audio Messenger Interface (AMI), and is included with all models of AMI. To
retrieve configurations and play audio messages, the AMI accesses a SmartMedia

®

card. Each AMI is

shipped with a SmartMedia

®

card pre-programmed with the

AMI Factory

Default

configuration.

Using the ACT software, custom configurations are created. After a custom configuration is created, it
must be saved to the local hard drive (typically in the <drive>:\Program Files\AMI Configuration
Tool\AMI Configs folder). After the configuration is saved to the hard drive, it must be moved or copied
to the SmartMedia

®

card using Windows Explorer.

N

OTE

:

Custom configurations cannot be saved directly to a SmartMedia

®

card.

«
1
2
3
4
5
...
»

Содержание GAI-TRONICS 10959-001


































Отзывы:

Нет отзывов