Hubbell ETXA Series, Описание, установка и руководство по эксплуатации, Страница: 44 / 52

44
Magnetic Contactor:
•
Disconnect power.
•
Open door.
•
Mark the wires going to the
magnetic contactor so they can be
re-connected in the same places
upon replacement.
•
Slide fuse block up to move out
of the way.
•
Disconnect all the wires from the
magnetic contactor.
•
Remove the two (2) screws
securing the magnetic contactor to
the base.
•
Install the replacement magnetic contactor with the two (2) screws removed in the last
step.
•
Re-connect the wires to the magnetic contactor in the same locations they were
previously disconnected from.
•
Close door.
•
Turn on power.
Transformer:
•
Disconnect power.
•
Open door.
•
Mark the wires going to the transformer so
they can be re-connected in the same places
upon replacement.
•
Disconnect all the wires from the
transformer.
•
Remove the two (2) screws securing the
transformer to the base.
•
Install the replacement transformer with the
two (2) screws removed in the last step.
•
Re-connect the wires to the transformer in the same locations they were previously
disconnected from.
•
Close door.
•
Turn on power.
Control Fuse:
•
Disconnect power.
•
Open door.
•
Twist fuse and pull from fuse holder.
•
Insert new fuse in holder and twist to lock in place.
•
Close door.
•
Turn on power.