END MOUNT
WALL MOUNT
CEILING MOUNT
INSTALLATION INSTRUCTIONS
END MOUNT
DETAIL -A-
OPTIONS
Make connections using quick connectors provided
and insert connectors in capture slots. See Detail A.
Secure wires with fingers
in frame as shown.
Select appropriate
knockouts for junction box.
Store unused lead in
transformer compartment
AC transformer:
120VAC - connect to black and
white leads.
277VAC - connect to red and
white leads.
*For emergency models, plug 2-pin
battery connector into PC board here.
Charger board and battery
pack. (Emergency models only)
Use pre-tinned
pigtail leads
provided for AC
input to sign.
Use pre-tinned pigtail leads
provided for AC input to sign.
Store unused lead in
transformer compartment
Charger board and battery
pack. (Emergency models only)
*For emergency models, plug 2-pin
battery connector into PC board here.
AC transformer:
120VAC - connect to black and
white leads.
277VAC - connect to red and
whiteleads.
Secure wires with fingers
in frame as shown.
Make connections using quick connectors
provided and insert connectors in capture
slots. See Detail A.
Make connections using quick connectors provided
and insert connectors in capture slots. See Detail A.
Secure wires
with fingers in
frame as shown.
AC transformer:
120VAC - connect to black and
white leads.
277VAC - connect to red and
black leads.
*For emergency models, plug 2-pin
battery connector into PC board here.
Store unused lead
in transformer
compartment
Charger board
and battery pack.
(Emergency
models only)
Use pre-tinned
pigtail leads
provided for AC
input to sign.
Make sure the canopy parts
click together when
assembling fixture.
Use the fingers in the frame to
secure the wiring. Typical all signs.
Insert connectors in capture slots once the connections have
been made with the provided connectors. Typical all signs.
Make sure the canopy parts
click together when
assembling fixture.
93050018
93050017
93050016
IMPORTANT
: Option connection wires must
be run before sign housing is attached to
canopy.
FIRE ALARM PANEL (-FAP) OPTION
FAP option connects to 24 volt AC or DC
(purple wires). Flash Rate: .5 seconds on, .5
seconds off.
DC REMOTE (-DC) OPTION
DC Remote option connects to 6-24 volt DC
[yellow(-), blue(+)].
FLASHER MODULE (-FM) OPTION
Emergency Mode Flash Rate: .5 seconds on,
.5 seconds off.
AUDIBLE/FLASHER MODULE (-AF) OPTION
Emergency Mode Beep/Flash Rate: .5
seconds on, .5 seconds off.
Dual circuit transformer secondary wires
connect to option board input connector here.
Connect dual-circuit
transformer primary
wires to utility source.
120VAC - connect to
black and white leads.
277VAC - connect to red
and white leads.
Connect option wires (-FAP
or -DC) to grey conncetor on
options board.
Secure wires with
fingers in frame similar
to incoming power wires.
yellow
(DC)
blue
(DC)
93050019
93050016
END MOUNT
WALL MOUNT
CEILING MOUNT
INSTALLATION INSTRUCTIONS
END MOUNT
DETAIL -A-
OPTIONS
Make connections using quick connectors provided
and insert connectors in capture slots. See Detail A.
Secure wires with fingers
in frame as shown.
Select appropriate
knockouts for junction box.
Store unused lead in
transformer compartment
AC transformer:
120VAC - connect to black and
white leads.
277VAC - connect to red and
white leads.
*For emergency models, plug 2-pin
battery connector into PC board here.
Charger board and battery
pack. (Emergency models only)
Use pre-tinned
pigtail leads
provided for AC
input to sign.
Use pre-tinned pigtail leads
provided for AC input to sign.
Store unused lead in
transformer compartment
Charger board and battery
pack. (Emergency models only)
*For emergency models, plug 2-pin
battery connector into PC board here.
AC transformer:
120VAC - connect to black and
white leads.
277VAC - connect to red and
whiteleads.
Secure wires with fingers
in frame as shown.
Make connections using quick connectors
provided and insert connectors in capture
slots. See Detail A.
Make connections using quick connectors provided
and insert connectors in capture slots. See Detail A.
Secure wires
with fingers in
frame as shown.
AC transformer:
120VAC - connect to black and
white leads.
277VAC - connect to red and
black leads.
*For emergency models, plug 2-pin
battery connector into PC board here.
Store unused lead
in transformer
compartment
Charger board
and battery pack.
(Emergency
models only)
Use pre-tinned
pigtail leads
provided for AC
input to sign.
Make sure the canopy parts
click together when
assembling fixture.
Use the fingers in the frame to
secure the wiring. Typical all signs.
Insert connectors in capture slots once the connections have
been made with the provided connectors. Typical all signs.
Make sure the canopy parts
click together when
assembling fixture.
93050018
93050017
93050016
IMPORTANT
: Option connection wires must
be run before sign housing is attached to
canopy.
FIRE ALARM PANEL (-FAP) OPTION
FAP option connects to 24 volt AC or DC
(purple wires). Flash Rate: .5 seconds on, .5
seconds off.
DC REMOTE (-DC) OPTION
DC Remote option connects to 6-24 volt DC
[yellow(-), blue(+)].
FLASHER MODULE (-FM) OPTION
Emergency Mode Flash Rate: .5 seconds on,
.5 seconds off.
AUDIBLE/FLASHER MODULE (-AF) OPTION
Emergency Mode Beep/Flash Rate: .5
seconds on, .5 seconds off.
Dual circuit transformer secondary wires
connect to option board input connector here.
Connect dual-circuit
transformer primary
wires to utility source.
120VAC - connect to
black and white leads.
277VAC - connect to red
and white leads.
Connect option wires (-FAP
or -DC) to grey conncetor on
options board.
Secure wires with
fingers in frame similar
to incoming power wires.
yellow
(DC)
blue
(DC)
93050019
93050016
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
Optional
