INSTALLATION INSTRUCTIONS - MATRIX AREA BACKLIGHT CONTROL SHEET 2 OF 2
SAVE THESE INSTRUCTIONS
701 Millennium Boulevard Greenville, SC 29607 (864) 678-1000
www.hubbelloutdoor.com
NOTES:
For replacement LED Assemblies and Drivers please contact Hubbell Lighting for any replacement parts.
Contact your local distributor or agent to confirm parts availability prior to ordering replacement parts.
BACKLIGHT CONTROL PANEL INSTALLATION
Your Matrix Area Light Fixture has two LED Light Engines; one mounted on each side of the housing. Because of this, field
installation of thebacklight control option requires removing fasteners from the LED bezel assembly on both sides of the fixture. This
is best accomplished with the LEDs facing upward.
There are two types of backlight control panels available for the Matrix Area Light; Front-Back and Left-Right. The illustration below
shows the LED lenses oriented in a Front-Back orientation with aim of the lenses (street side) toward the front of the fixture. This
fixture will require Front-Back (FB) Backlight Control Panels, with the hood oriented to block the light on the house side.
Use a T15 Torx bit screwdriver and remove the sixteen (16) screws indicated from the face of the LED bezel assembly.
Retain the screws for reinstallation.
Position the backlight control panel with the hooded openings aimed toward the street side. The house side should be
blocked off by the hood. On a fixture with Left or Right aimed optics, use the LR backlight control panel and aim the
hooded openings toward the street side, blocking all light from the house side.
Replace and tighten the sixteen (16) torx head screws with a T15 bit driver. If you have a torque driver, drive these to
10-15 in-lbs.
Repeat the previous steps on the other half. The backlight control panels should be aiming the same direction.
•
•
•
•
TORX HEAD (T15) SCREWS (QTY 16)
ALREADY INSTALLED ON FIXTURE
BACKLIGHT CONTROL PANEL (2 REQ'D)
*THIS EXAMPLE*
STREET SIDE
*THIS EXAMPLE*
HOUSE SIDE
(TYPICALLY THE SIDE
WITH MOUNTING ARM)
FB BLC PANEL
LR BLC PANEL
HOUSE
SIDE
STREET
SIDE
HOUSE SIDE
STREET SIDE
SCREWS TO BE REMOVED AND
REPLACE FOR INSTALLATION
BEZEL
