Page 4
Kim Lighting • 16555 E. Gale Ave. • P.O. Box 60080 • City of Industry, CA 91716-0080 • 626/968-5666 • FAX 626/330-3861
PGL5/6 - Parking Garage Luminaire
Installation Instructions
REMOVAL FROM J-BOX
Make certain electrical supply is
OFF
before starting removal.
1. Loosen lock screw inside fixture (do not remove).
With both hands on fixture slide off hooks.
2. Let fixture hang by suspension strap. Fish wire
connections out of J-Box and disconnect.
3. Holding fixture lift suspension strap off
speed mount wire retainer.
!
Suspension
Strap
Screws
4.
Ballast Wiring Information:
To change input voltage
in a multi-tap ballast, electricity must be
OFF
.
Connect black lead from terminal block to desired
voltage lead on ballast, i.e.; 208V or 240V.
3. Remove the reflector assembly by loosening the two
screws in the outer flange of the reflector (do not
remove).
Terminal Block
LAMP REPLACEMENT & BALLAST ACCESS
cont'd.
