Page 3 Kim Lighting • 16555 E. Gale Ave. • P.O. Box 60080 • City of Industry, CA 91716-0080 • 626/968-5666 • FAX 626/330-3861
PGL5/6 - Parking Garage Luminaire
Installation Instructions
4. Make certain wires enter j-box as fixture is raised.
The suspension strap will guide slots in the top of the
fixture to hooks on the speed mount plate. Slide the
fixture towards the center allowing the hooks to
accept the weight of the fixture. Fixture locks in place
when fully engaged on hooks.
LAMP REPLACEMENT & BALLAST ACCESS:
Make certain the electrical supply is
OFF
before accessing the ballast.
1. Remove lens by pulling out on top portion of each
latch. Unhook latch from lens & swing lens down
and allow to hang free.
2. Remove & replace lamp of type and wattage as
shown on fixture label. (To remove reflector and
access ballast assembly continue to step 3 on page
4.) Close fixture.
!
6. Install lamp of type and wattage as shown on fixture
label. Close lens.
FIXTURE CONNECTION TO SPEED MOUNT & FINAL INSTALLATION
cont'd.
5. Unlatch lens by pulling out on top portion of each latch.
Unhook latch from lens & swing down and allow to
hang free.
WARNING!
This H.I.D. / Fluorescent fixture utilizes a lamp that may
contain mercury. For information on disposal of lamp,
go to website:
www.lamprecycle.org
