Pub. 42004-645L2C
Model 723-801 SmartSeries
®
Remote Subset Amplifier
Page: 2 of 15
d:\standard ioms - current release\42004 instr. manuals\42004-645l2c.doc
01/04
Features and Functions
The Model 723-801 Remote Subset Amplifier provides the following features when installed in a
SmartSeries
®
System:
•
Enables one-way paging from the remote
subset handset. Priority Page feature enables
important messages to override operational
communication
•
SmartVolume™ feature measures the ambient
noise and automatically adjusts the speaker
output level (desk-edge and flush-mount stations
only)
•
Enables two-way party line communication
from the remote subset handset
•
Contains page amplification to broadcast
announcements over the station’s speaker
•
Monitors and controls off-hook and page
status of the remote subset handset. Limits
off-hook and page durations to prevent open
microphone and nuisance page problems
•
Monitors and reports problems with handset
amplifier, the speaker amplifier, and speaker
voice coil to the MCU
•
Supervises the local speaker (desk-edge and
flush-mount stations only)
•
Monitors and reports the status of the auxiliary
inputs
Optional Features
The following features are available as options to the standard configuration of a station used in an
SmartSeries
®
system and installed in a special enclosure. Contact the GAI-Tronics Field Service
Department for further information about these features.
•
The Selected Page Destination feature allows the manual selection of up to four page destinations.
•
The Supervised Input feature allows the monitoring and supervision of one or two initiating device
circuits (IDCs), initiating an alarm when the supervised device is activated.
•
The Power Relay Module provides a relay contact output, typically to switch power to a visual
signaling device, for directed or relay group operation. Supervision of the controlled device’s cable
can also be enabled.
•
The Station Emergency Party Line feature supports annunciation for two party lines.
