MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING
CASTLETON, VERMONT USA | HUBBARDTONFORGE.COM
42403
ASSEMBLY & INSTALLATION INSTRUCTIONS
Refraction Outdoor Sconces 302620 & 302623
B403
ALIGNMENT
STUD
SLOT
N
C
B
O
A
D
(Figure 5)
B
A
BACK VIEW
C
D
HOLE FOR
ALIGNMENT
STUD
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you
purchased this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of
this fixture.
To Complete Installation
(Figure 5)
1.
Install bulbs (O)
(included
) into sockets (N).
2.
Orient front tube (B) assembly so that installed thumb
screws and washers are towards the top.
3.
Front tube (B) assembly can only be installed one way.
The hole in front tube (B) will need to line up with the
alignment stud on the fixture (A).
4.
Tilt front tube (B), slip over bulbs (O) and slide thumb
screws (C) and rubber washers (D) down into slots on top
of fixture (A).
Note:
Be sure rubber washers (D) are on the backside of
the fixture as seen in Figure 5 - back view.
5.
Align bottom holes in fixture with tube (B) and install
remaining thumb screws (C) and rubber washers (D) to
secure front tube assembly.
Note:
Make sure all thumb screws are as tight as
possible.
6.
Restore electricity at main breaker.
6 OF 6
Caution: Be careful not to hit bulbs with front tube.
