MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING
CASTLETON, VERMONT USA | HUBBARDTONFORGE.COM
42403
ASSEMBLY & INSTALLATION INSTRUCTIONS
Refraction Outdoor Sconces 302620 & 302623
B403
TEXTURED
SURFACE
M
L
K
J
B
(Figure 4)
To Prepare Glass for Installation
(Figure 4 )
1.
Unpack glass (J).
2.
Place glass (J) on a clean surface. Press anchors (K) into
holes in glass from each side until anchor is flush with side
of glass.
3.
Locate front tube assembly (B). Place glass into front tube
with textured surface oriented as shown in Figure 4.
Note:
It may be necessary to loosen set screw (M) to allow
glass to pass into tube.
4.
Align anchors (K) in glass with holes in front tube (B).
Thread flat head screws (L) into anchors evenly to secure
glass to tube.
5.
Using hex wrench provided, snug set screw (M) against
glass. Be careful not to overtighen and break glass.
6.
For 302623 - Repeat steps for second piece of glass.
7.
Follow steps on next page to complete installation.
5 OF 6
