6
Setting of voltage boosting: the user may select based on actual demand.
Voltage of boosting stop: 10
～
80KV
Standing time: 0
～
15min
Interval of boosting: 0
～
5min
Stirring switch: On / Off
Boosting frequency: 1
～
6 time
（
s)
Voltage boosting rate: 0.5KV/S
～
5 KV/S
Cup bit setting:according to the user testing oil sample
placed oil cup bit shall prevail.
⑴ ： YES NO ⑵ ： YES NO ⑶ ： YES NO
Print settings: Users choose for themselves.
Automatic Printing： YES NO
Clock settings:Users can make change when need to calibration time.
09/07/05 08:08:45
Press “Esc” key to exit this interface after the setting is done.
③
Testing:
Press the “Select” key to select the “Start Test” menu and press the “Enter” key to enter
the following interface:
