32
Box gate
Color ribbon
PRTer nose
Fig.7 PRTer nose inside box gate
Take down the former color ribbon from PRTer nose (see Picture 8 schematic drawing for
taking down color ribbon).
（
2
）
Attention: Please first lift the right margin of the color ribbon box, and then lift left
side again to take down the color bandbox.
Fig.8 Schematic drawing for taking the color ribbon
(3) Exchanging new color bandbox
First gently place left side color bandbox on the left side gear shaft of PRTer nose, lift right
margin slightly, do not lay down. By now if you discover the left side color bandbox has not
fallen, please use the finger to rotate slightly according to the arrow direction, fall the right
margin of color bandbox down after left side color ribbon lays down. Please inspect
whether the color ribbon pulls straight. If it has not been pulled straight, or the color ribbon
also reveals outside color bandbox, you may again gyrate the knob on the color bandbox,
until the color ribbon drags into in the color bandbox and pulls straight. If it does not have
the paper in the nose, replacement of the color ribbon will be easier.
(4)Close the box gate.
