9
Press Key-S for exiting from the image and returning to adjust menu.
Choose Item-7 Gauge gas check via Key-S, and then press Key-E, then the following
image is displayed:
Note: whether HC/ C
3
H
8
appears on the screen is determined by the choice of fuel type in
SET menu. Choose GASOLINE, and HC appears; choose LPG and C
3
H
8
appears.
At the same time, cursor can be moved from
TEST
to
ESC
. When cursor points at
TEST
,
a prompt appears on the screen by pressing E: press gauge gas to Test point(S: exit E:
confirm to check)
3-5sec later, press E to carry on 45sec. test. When countdown ends, send the
average value of the last 30sec. to check out as the test result. Meanwhile
PRT
appears
on the screen. Choose
PRT
via S, and then test result can be PRTed via E.
Move cursor to
E
SC , press E for returning to adjust menu, and then press E for returning
to main menu.
3.7 Search
The instrument is capable of saving test data and at most can save test data of 2000
vehicles (beyond that, only data of the last 2000 vehicles would be saved and the anterior
data would be lost).
SCH can be performed on the data saved.
Choose
SCH
in main menu via Key-S and then press Key-E, and then the following menu
Gauge
gas
check
11:07:35
C.Cur
Check out
HC/C
3
H
8
CO
CO
2
O
2
Nox
S : select, E: confirm
ESC
TEST