7
⑸
. 2-digit storage data serial number
⑹
. Unit symbol
⑺
. Date locked symbol
⑻
. Decimal system radix point
⑼
. 4-Digit LCD digital display
2
．
Explanation for Special Symbols
⑴
.
Low battery symbol, when the voltage of battery is lower than 4.8V, this symbol display,
please replace battery in time.
⑵
.“OL A” This symbol indicates that the current on test has exceeded the maximum measurement
limit of the meter.
⑶
.“MEM” Memory mode, it will display during the data storage process.
⑷
. “Full” symbol, when the storage memory has been filled with 99 groups of data, it will display
“FULL” symbol by flash, which means it cannot continue to store data.
⑸
.“MR” data access symbol, which is displayed during looking up data, meanwhile, it will display the
serial number of data in storage.
⑹
.“End” exit symbol, it will display during the exit.
⑺
.“dEL” data delete symbol, it will display when deleting data.
*
⑻
.“no- -” None received signal instructions, dynamic display, it may not in test mode, or adjust the
location and distance from receiver.
3
．
Display Demonstration
⑴
. ——The current on test
is 0.002A (2mA)
⑵
. ——Locked display Data
——The data is automatic
stored as group 3
——The current on test is: 160.5A
