8
⑶
.——The current on test is: 571A
——Low battery symbol
, please replace.
⑷
.——Look up data of group 3 in storage
——The current on test is: 160.5A
⑸
.—— “FULL” flash display:
Storage is full of 99 groups
——It can’t store more unless
delete storage
⑹
.——“dEL” Indication of data delete
⑺
.—— “End” Indication of exit
*
⑻
.——“no- -”Dynamic display: none
received signal
VII.Operation
Please check all parts of the meter carefully before usage, to see whether there is
any damage. And make sure no damage before usage.
According to manual instructions to install the battery
A.Tester Operation
1.Power On/Off
Press POWER button to power on, the instrument will displays the LCD screen, entering normal
testing mode. If LCD display is relatively dark after power on, it is possible that battery voltage is a bit
lower. Please replace battery. 15 minutes after powering on the meter, if it remains idle, an
auto-power off procedure starts to preserve the battery life and LCD will continue flash until the
complete switch off takes place after 30 seconds. In case of LCD continuous flash, press POWER
button, then the meter will continue to work.
