1
Warning
Thanks for your purchase of HZRC9000B H/L Voltage Clamp Meter of our company. In order to
make better use of this product, please make sure to:
——Read this manual in detail and the operator must totally understand this manual and be in
proficient in operation of this meter before making test on spot.
——Strictly comply with the security rules and notice items listed on this manual.
In any case, it should pay special attention to safety in use of this meter, particularly in measurement
of circuitry with more than AC100V and above voltages.
If the voltage of tested circuitry has exceeded 600V, it must be used by connecting with an insulation
rod.
As it is very dangerous of high voltage transmission line, the operator must get strict training and the
relevant certification on high-pressure operation of the state before using this meter and making a field
test.
It is strictly forbidden to use this meter to test the wire without any insulate protection has voltage
exceed 35KV or convergence generatrix.
Please pay attention to marked words and symbols on panel or backboard of this meter.
Please do not put or store this meter in the place of high temperature, with moisture, with frozen dew
or with direct daylight irradiation for a long time.
Please note the battery polarity when replacing battery, and remove the battery if you expect not to
use this meter for a long time.
It must be operated by qualified staff that has the authorization on tearing down or repairing this
meter.
Please do not use it when there is any damage on the transducer clamp or other parts of this meter.
To avoid the impact of transducer clamp, it needs to maintain this meter regularly. Do not use
corrosive or coarse materials to clean, but use soft cloth (such as glasses cloth), dipping clean anti-rust
desiccant lubricant (such as WD-40), and making a gentle wiping.
For the reason of this meter, in case that any danger may occur if continue to use it, stop using it
