Huazheng Electric Manufacturing HZ-600C, Руководство пользователя

Страница: 8 / 20

5

Input information

Select end-frequency and adjust testing parameter

Select winding

Start testing

Replace test winding

Select winding

Start test

Repeat above process until all winding tests are done

Analyze data

Export report

Turn off software

Power off collector

Disconnect collector and computer

Remove transformer winding

Test completed.
Part II Preparation
Note: basic operations of computer and Windows operating system are not contained in the
operation instructions. Please refer to relevant computer books.
Note: basic operations of Windows operating system involved in the operation instructions are
based on Windows 7 operating system. The differences in operation between other Windows system
and Windows 7 system are not contained in the operation instructions, for which please refer to relevant
computer books.
Part III Test Wiring
3.1 Panel Introduction
Panel of the transformer winding deformation tester is as shown in Figure 1.