8
Checking Quantities and Types of Goods > Inspecting Goods > Installing the Typical Configuration Suite
> Installing the All-in-One Cabinet
> (Optional) Installing the SIM Card (for All Scenarios)
Remove the General Packet Radio Service
(GPRS) module from the ECC.
Install the subscriber identity module (SIM)
card.
SIM card slot
GPRS module
ECC
Lead the cable from the GPRS antenna into the cabinet
through the cable hole on the top of the cabinet. Route the
cable along the external side of the mounting bar on the
right of the rear of the cabinet to the ECC at the cabinet
bottom. Then bind the cable to the cable tray under the ECC.
Checking Quantities and Types of Goods > Inspecting Goods > Installing the Typical Configuration Suite
> Installing the All-in-One cabinet >
Installing the GPRS Antenna (for All Scenarios)
Loosen screws beside the GPRS module
and pull out the module.
