Step 2
Choose
Area
>
AP Zone Management
. The
Zone Configuration
page is displayed.
Step 3
Click
Add
. The
Add AP Zone
dialog box is displayed, as shown in
.
Figure 5-5
Adding an AP zone
Step 4
Type the zone where the AP is located and set
SCTP Port
to the port ID that is the same as the
port ID of the AG.
Step 5
Click
Next
to set the IP addresses of the AP Manager, AG, SeGW, and CLK and the information
about neighboring macro cells around the AP cell in sequence.
Step 6
Confirm the settings, and then click
Finish
, as shown in
.
Figure 5-6
Completing settings
5 Configuring the UAP2105
UAP2105
User Guide
5-6
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2009-08-20)
