manualshive.com logo in svg

Huawei UAP2105, Руководство пользователя

Поделиться
Скачать
Huawei UAP2105 Скачать руководство пользователя страница 19

Figure 3-2

 LED on the UAP2105

 

Table 3-1

 describes the LED and its status.

Table 3-1

 LED on the UAP2105

Status

Description

ON (red)

No AP cell is set up, or an alarm of cell setup failure is generated.

ON (blue)

An AP cell is set up. No service is provided, and no interference
exists in the signals of the cell.

Blinking in red (ON for
1s and OFF for 1s)

Slight interference exists in the signals of an AP cell. The
UAP2105 works properly, but the quality of service (QoS)
deteriorates.

Blinking in red (ON for
0.25s and OFF for 0.25s)

Strong interference exists in the signals of an AP cell. The
UAP2105 cannot work properly.

Blinking in blue (ON for
1s and OFF for 1s)

An AP cell is set up successfully, and services are being provided
in the cell.

Blinking in blue (ON for
0.125s and OFF for
0.125s)

Software is being downloaded, or the system is being upgraded.

 

UAP2105
User Guide

3 Introduction to the UAP2105

Issue 03 (2009-08-20)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

3-3

Содержание UAP2105
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды