Only non-chair sites can request chair control rights when no chair site exists in a conference.
Audio-only sites cannot request chair control rights.
Request Floor
If a non-chair site wants to speak during a conference, the site can request the floor from the
chair site.
The
Request Floor
function is available when the conference already has the chair site. When
a site requests the floor, the request is submitted to the chair site. The chair site can then determine
whether to give the floor to the site.
l
If the chair site gives the floor to the site, the site is broadcast, and all the sites, except the
chair site and the site given the floor, are muted.
l
If the chair site does not give the floor to the site, the conference status remains unchanged.
Continuous Presence
The continuous presence function simultaneously displays the videos of two or more sites on
the same monitor. The number of sites to be displayed and the layout of the site videos vary
depending on continuous presence modes.
NOTE
This function is available only when continuous presence resources have been reserved for the conference.
To set continuous presence:
Select a pane. From the drop-down list box in the displayed dialog box, select the site whose
video you wish to display in the pane. Then select
OK
.
If a site already exists in the pane selected, the site is displaced by the site you just select.
To delete all the sites from continuous presence views, select
Delete All
.
Revoke Presentation
During a dual-stream conference where the
Presentation
mode is adopted, if a non-chair site is
sharing its presentation, the chair site can revoke the presentation sharing right of this site.
A site stops sharing its presentation after its presentation sharing right is revoked.
Voice Activation
Voice activation is used in discussion mode. When voice activation is enabled, the site with the
highest volume is displayed to other sites in the conference.
Based on your experience, set
Sensitivity to enable voice activation.
l
If the volume of one or more sites exceeds the voice activation threshold, the video of the
site with the highest volume is broadcast.
l
If the voice activation threshold is not exceeded, the conference status does not change.
To disable voice activation, select
Disable
from the
Voice Activation
drop-down list box.
HUAWEI TE30 Videoconferencing Endpoint
User Guide
7 Conference Control
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
70
