Huawei SmartAX MA5671, Быстрый старт

Страница: 6 / 12

6
Performing the Following Steps to Connect the MA5671 to Each Product
Based on the Preceding Cable Connections
Step 1
Use an optical fiber to connect the OPTICAL port on the MA5671 to the optical port in
the wall.
NOTE

The optical fiber connector connected to the OPTICAL port must be of the SC/UPC type
.
 The bending radius of optical fibers must be greater than 30 mm in optical fiber
deployment for proper optical fiber running.
Step 2
Use an Ethernet cable to connect the LAN port to network port on the PC or IP set top
box (STB).
Step 3
Use a power adapter to connect the POWER port to the power socket.
Step 4
Press ON/OFF to switch the MA5671 on.