background image

 

 

Safety Precautions 

To use the device properly and safely, read the safety precautions carefully before using 
the device and strictly observe these precautions when using the device. 

Safety precautions:

 

 

Do not look into the optical port without eye protection. 

 

Keep the device out of the reach of children as the components or accessories may be 
swallowed. 

 

Install the device in strict compliance with the requirements of the supplier. Reserve 
a space of at least 10 cm above and around the device for heat dissipation. During the 
installation, keep the device away from heat or water sources, and electric appliances 
that  generate  strong  magnetic  or  electric  fields,  such  as  microwave  ovens, 
refrigerators, and mobile phones. 

 

The  power  supply  voltage  of  the  device  must  meet  the  requirements  on  the  input 
voltage of the device. 

 

Do not use any power adapters that are not in the standard configuration. Otherwise, 
the device may malfunction or be unsafe. 

 

Dry  your  hands  before  connecting  or  disconnecting  cables.  Stop  the  device  and 
switch the device off before connecting or disconnecting cables. 

 

Do not place any object on the device, preventing the device from being damaged 
due to overheating or deformation. 

 

Prevent objects, such as metal or water, from entering the device through the heat 
dissipation hole. 

 

Switch the device off and disconnect all cables, including the power cable, network 
cable, and phone cable, during periods of lightning activities. 

 

Do not lead the strength member of the optical fiber or other metal parts indoors. Do 
not connect network cables, phone cables, power adapters, or power adapter cables 
outdoors,  preventing  device  damage  and  bodily  injuries  that  are  prone  to  occur 
during thunderstorms. 

 

If  an  abnormality  occurs,  for  example,  liquid  entering  the  device,  smoke,  unusual 
sound, and smell, immediately stop the device, switch the device off, disconnect all 
cables (such as the power cable, optical cable, and network cable) from the device, 
and contact the authorized service center. 

 

Do  not  disassemble  the  device  without  permission.  In  the  event  of  a  device  fault, 
contact the authorized service center. 

 

Dispose of packing materials and old/abandoned devices in accordance to local laws 
and regulations (recycling them is strongly recommended). 

Содержание SmartAX MA5671













Отзывы: