Huawei RRU3260 Скачать руководство пользователя страница 9

Страница: 9 / 132

Changes in the RRU3260 Installation Guide

This chapter describes the changes in the

RRU3260 Installation Guide

10 (2015-12-30)

This is the tenth official release.

Compared with issue 09 (2015-08-30), this issue includes the following change:

Topic

Change Description

9.11 Installing a CPRI Fiber Optic Cable

Added the procedure of installing CPRI
optical cables for single-fiber bidirectional
optical modules.

Compared with issue 09 (2015-08-30), this issue does not include any new information and
no information is deleted from this issue.

09 (2015-08-30)

This is the ninth official release.

Compared with issue 08 (2015-03-23), this issue includes the following change:

Topic

Change Description

The whole document

Optimized the contents in this document.

Compared with issue 08 (2015-03-23), this issue does not include any new information and
no information is deleted from this issue.

08 (2015-03-23)

This is the eighth official release.

Compared with issue 07 (2014-11-10), this issue includes the following change:

RRU3260
Installation Guide

1 Changes in the RRU3260 Installation Guide

Issue 10 (2015-12-30)

Huawei Proprietary and Confidential

Содержание RRU3260





































































































































Результаты поиска

Содержание RRU3260

Отзывы:

Huawei RRU3260, Руководство по установке, Страница: 9 / 132

Результаты поиска

Содержание RRU3260

Отзывы: