Huawei RRU3260 Скачать руководство пользователя страница 22

Страница: 22 / 132

Figure 3-5

Recommended usage of the RF ports on an RRU used for DBS3900 LTE

V100R003C00 and later versions

3.3 RRU Indicators

This section describes six indicators on an RRU. They indicate the running status.

For detailed positions of RRU indicators, see

3.2 RRU Ports

Table 3-3

describes RRU indicators.

Table 3-3

RRU indicators

Indicator

Color

Status

Meaning

RUN

Green

Steady on

There is power supply, but the module is
faulty.

Steady off

There is no power supply, or the module is
faulty.

Blinking (on for
1s and off for 1s)

The board is functioning properly.

Blinking (on for
0.125s and off for
0.125s)

Software is being loaded to the module, or
the module is not started.

ALM

Red

Steady on

Alarms are generated, and the module must
be replaced.

RRU3260
Installation Guide

3 Information About the Installation

Issue 10 (2015-12-30)

Huawei Proprietary and Confidential

Содержание RRU3260





































































































































Результаты поиска

Содержание RRU3260

Отзывы:

Huawei RRU3260, Руководство по установке, Страница: 22 / 132

Результаты поиска

Содержание RRU3260

Отзывы: