Huawei RRU3232 Скачать руководство пользователя страница 36

Страница: 36 / 95

Installing the RRU

About This Chapter

This chapter describes the procedure for installing the RRU. The RRU can be installed on a pole,
U-steel, angle steel, or wall. The procedure for installing the RRU varies depending on
installation options.

CAUTION

Do not stand the RRU upright because the load-bearing capacity of the RF ports at the RRU
bottom is low.

Place a foam pad or cardboard under an RRU to protect the RRU housing from damage
during the installation.

6.1 Mounting Kits for an RRU

This section describes the bracket assembly and the attachment plate for an RRU.

6.2 Installing the RRU on a Pole

One or more RRUs can be installed on a pole.

6.3 Installing the RRU on U-steel

This section describes the procedure for installing the RRU on U-steel and the precautions that
must be taken during the installation. The RRU installed on U-steel can be mounted to a tower
or placed on the ground. It is recommended that only one RRU be installed on U-steel.

6.4 Installing the RRU on Angle Steel

This section describes the procedure for installing the RRU on angle steel and the precautions
that must be taken during the installation. The RRU installed on angle steel can be mounted to
a tower or placed on the ground. It is recommended that only one RRU be installed on angle
steel.

6.5 Installing the RRU on a Wall

This section describes the procedure for installing the RRU on a wall and the precautions that
must be taken during the installation.

6.6 Hoisting the RRU and Mounting Kits onto a Tower

RRU3232
Installation Guide

6 Installing the RRU

Issue 05 (2011-10-20)

Huawei Proprietary and Confidential

Содержание RRU3232
































































































Результаты поиска

Содержание RRU3232

Отзывы:

Похожие инструкции для RRU3232

Бренды по названию

Популярные бренды

Huawei RRU3232, Руководство по установке

Результаты поиска

Содержание RRU3232

Отзывы:

Похожие инструкции для RRU3232

Бренды по названию

Популярные бренды